Gears and transmission
4:1 Spur Gearbox v4 (M3 inserts in base, M3 cover bolts)
- Bounding box
- 103.1 × 88.0 × 59.5 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Precision 4:1 gearbox using 608 bearings, 24 mm x 12.5 mm motor with 2 mm shaft; base prepared for M3 heat-set inserts and cover fixed with M3 bolts
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 1 mm | 0.8 – 2 |
| Pinion teeth | 15 | 12 – 24 |
| Reduction ratio (x:1) | 4 | 2 – 6 |
| Gear face width | 8 mm | 4 – 14 |
| Added centre distance (backlash) | 0.1 mm | 0 – 0.5 |
| Bore clearance on shafts | 0.1 mm | 0 – 0.3 |
| 608 outer diameter | 22 mm | 22 – 22 |
| 608 bore / output shaft diameter | 8 mm | 8 – 8 |
| 608 width | 7 mm | 7 – 7 |
| Pocket diametral clearance | 0.05 mm | 0 – 0.3 |
| Retaining lip thickness | 1 mm | 0.8 – 3 |
| Lip hole diameter | 16 mm | 12 – 19 |
| Gear to wall gap | 1.5 mm | 1 – 4 |
| Shaft end float | 0.2 mm | 0 – 0.6 |
| Shaft shoulder / spacer OD | 11 mm | 9 – 12 |
| Drive flat depth on output shaft | 0.6 mm | 0.3 – 1.2 |
| Output shaft length beyond cover | 20 mm | 8 – 50 |
| Motor shaft diameter | 2 mm | 1.5 – 4 |
| Motor shaft length | 12 mm | 6 – 16 |
| Motor body diameter | 24 mm | 12 – 36 |
| Motor body length | 12.5 mm | 5 – 60 |
| Motor bolt spacing | 18 mm | 14 – 24 |
| Motor bolt hole diameter | 3.2 mm | 2 – 4 |
| Motor bolt counterbore diameter | 6 mm | 4 – 7 |
| Pinion lower hub diameter | 9 mm | 7 – 11 |
| Pinion hub lift above motor face | 0.5 mm | 0.2 – 2 |
| Housing wall thickness | 10 mm | 8 – 14 |
| Gear tip to wall clearance | 3 mm | 1.5 – 8 |
| Housing corner radius | 5 mm | 0 – 8 |
| Base hole for M3 heat-set insert | 4.2 mm | 3.8 – 4.6 |
| Insert length (hole depth) | 5.7 mm | 4 – 8 |
| Extra depth below insert | 2 mm | 0.5 – 4 |
| Cover M3 clearance hole | 3.4 mm | 3.2 – 3.8 |
| Cover bolt head counterbore diameter | 6.2 mm | 5.5 – 8 |
| Cover bolt head counterbore depth | 3.2 mm | 2.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.