Gears and transmission
32DP 46T Spur Gear
- Bounding box
- 38.1 × 38.0 × 11 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
46 teeth 32P spur gear
Parameters
| Name | Value | Range |
|---|---|---|
| Diametral pitch (teeth per inch) | 32 mm | 8 – 64 |
| Number of teeth | 46 mm | 8 – 120 |
| Face width | 6 mm | 2 – 20 |
| Pressure angle | 20 deg | 14.5 – 25 |
| Hub diameter | 14 mm | 8 – 22 |
| Hub height above face | 5 mm | 0 – 20 |
| Shaft bore diameter | 6 mm | 3 – 12 |
| Number of lightening holes | 6 mm | 0 – 10 |
| Hole diameter | 5 mm | 2 – 9 |
| Hole centre radius | 12.5 mm | 9 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
