Gears and transmission
312 to 100 RPM Two-Stage Gearbox
- Bounding box
- 120 × 80 × 50 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a gearbox that takes a 312 RPM motor down to about 100 RPM. Rules: Use the SpurGear script (Utilities > Add-Ins > Scripts) for gears Output must spin the SAME direction as the motor Must fit inside a 120 x 80 mm plate Shafts are 8 mm Gears must actually mesh and move in Fusion (joints + motion links)
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length X | 120 mm | 60 – 200 |
| Plate width Y | 80 mm | 40 – 160 |
| Plate thickness | 8 mm | 5 – 16 |
| Plate corner radius | 4 mm | 0 – 12 |
| Shaft bearing bore, press fit | 7.8 mm | 6 – 9 |
| Motor screw holes, M3 | 3.4 mm | 2.5 – 5 |
| Motor hole spacing | 20 mm | 12 – 40 |
| Base mounting holes, M4 | 4.5 mm | 3 – 6 |
| Mounting hole inset from edge | 10 mm | 5 – 20 |
| Shaft diameter | 8 mm | 4 – 12 |
| Input shaft length | 40 mm | 20 – 80 |
| Intermediate shaft length | 50 mm | 20 – 80 |
| Output shaft length | 40 mm | 20 – 80 |
| Shaft end chamfer | 0.8 mm | 0.2 – 2 |
| Module | 1.5 mm | 0.5 – 3 |
| Pressure angle | 20 deg | 14 – 25 |
| Gear face width | 8 mm | 4 – 16 |
| Input pinion teeth | 16 mm | 8 – 40 |
| Intermediate big gear teeth | 40 mm | 16 – 80 |
| Intermediate pinion teeth | 16 mm | 8 – 40 |
| Output gear teeth | 20 mm | 8 – 60 |
| Compound gear hub diameter | 18 mm | 10 – 40 |
| Axial gap between gear planes | 4 mm | 2 – 12 |
| Input shaft X | 16 mm | 5 – 115 |
| Input shaft Y | 32 mm | 5 – 75 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
