Plates and panels
300x200x10 Mounting Plate
- Bounding box
- 300.0 × 200.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular steel plate 300 mm x 200 mm x 10 mm thick. Origin at bottom-left corner. Add four M8 counterbored holes (9 mm through, 14 mm counterbore, 8 mm deep) at (25,25), (275,25), (25,175), (275,175). Add four 6.8 mm through holes at (130,80), (170,80), (130,120), (170,120). Add two 5.0 mm through holes at (60,60), (60,140). Add one slot 7 mm wide and 20 mm long along the X axis, centered at (240,100), through the plate.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 300 mm | 50 – 600 |
| Plate Width (Y) | 200 mm | 50 – 600 |
| Plate Thickness (Z) | 10 mm | 3 – 40 |
| Corner Hole Inset | 25 mm | 8 – 100 |
| Through Hole Dia (M8) | 9 mm | 3 – 20 |
| Counterbore Dia | 14 mm | 5 – 30 |
| Counterbore Depth | 8 mm | 1 – 20 |
| Hole Dia (6.8) | 6.8 mm | 1 – 20 |
| Pattern Center X | 150 mm | 0 – 600 |
| Pattern Center Y | 100 mm | 0 – 400 |
| Pattern Spacing X | 40 mm | 5 – 300 |
| Pattern Spacing Y | 40 mm | 5 – 200 |
| Hole Dia (5.0) | 5 mm | 1 – 20 |
| Holes X Position | 60 mm | 0 – 600 |
| Lower Hole Y | 60 mm | 0 – 400 |
| Upper Hole Y | 140 mm | 0 – 400 |
| Slot Center X | 240 mm | 0 – 600 |
| Slot Center Y | 100 mm | 0 – 400 |
| Slot Width | 7 mm | 2 – 20 |
| Slot Overall Length | 20 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol