Plates and panels
3-Fan Air-Cooled Chiller GA | 3200 × 1096 × 2432
- Bounding box
- 3225.0 × 1096.0 × 2432.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
3D parametric air-cooled unit assembly reconstructed from user's 4-view drawing: 3200 mm length, 1096 mm overall width, 1042 mm cabinet width, 2432 mm overall height, three upward fans, front condenser grille panels, bottom access cabinets, DN50 outlet above DN50 inlet on right-hand front and left-side incoming power entry.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall bank length | 3200 mm | 3000 – 3500 |
| Overall skid width | 1096 mm | 1080 – 1140 |
| Cabinet body depth | 1042 mm | 1000 – 1050 |
| Full height including fan hub | 2432 mm | 2390 – 2520 |
| Steel base frame height | 110 mm | 95 – 140 |
| Fan roof elevation | 2200 mm | 2160 – 2240 |
| Front grille lower elevation | 900 mm | 860 – 930 |
| Front grille top elevation | 2150 mm | 2110 – 2180 |
| Top fan outer diameter (estimated) | 890 mm | 830 – 940 |
| Axial fan count | 3 | 2 – 3 |
| Fan impeller blade count (illustrative) | 7 | 5 – 9 |
| Grille cell rows | 14 | 10 – 18 |
| Grille cell columns | 12 | 9 – 16 |
| Water inlet/outlet DN50 | 50 mm | 48 – 55 |
| Water connection vertical pitch (estimated) | 220 mm | 175 – 260 |
| Lower water inlet height (estimated) | 330 mm | 270 – 410 |
| Cabinet front sheet thickness (representation) | 8 mm | 4 – 12 |
| Grille crossbar width (estimated) | 9 mm | 6 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec