Gears and transmission
3:1 Spur Planetary Gearbox (20 mm Motor Input)
- Bounding box
- 87.8 × 87.8 × 37.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
I need a two spur, planetary gear box with reduction ration 3:1 for my motor that is 20mm in diameter for the rotating part.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1.5 mm | 1 – 2.5 |
| Sun Teeth | 24 teeth | 20 – 36 |
| Ring Teeth (ratio = 1 + ring/sun) | 48 teeth | 32 – 80 |
| Planet Count | 3 count | 2 – 5 |
| Gear Face Width | 10 mm | 4 – 20 |
| Ring Gear Rim Thickness | 6 mm | 3 – 15 |
| Sun Input Bore (motor) | 20 mm | 5 – 24 |
| Planet Bore | 5.2 mm | 3 – 9 |
| Carrier Pin Diameter | 5 mm | 2.5 – 8.5 |
| Carrier Plate Diameter | 66 mm | 40 – 90 |
| Carrier Plate Thickness | 6 mm | 3 – 14 |
| Output Shaft Diameter | 8 mm | 4 – 16 |
| Output Shaft Length | 20 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
