2D CAD Technical Drawing Plate

Create a 2D CAD technical drawing based exactly on the attached reference image. Reproduce the same overall geometric shape, including the zigzag top and bottom sections, left arrow-like pointed shape, right arrow-like pointed shape, diagonal lines, rectangular cutouts, and the two inner rectangles. Use inches as the drawing unit. Follow the dimensions shown in the reference image exactly and do not change the measurements. The visible dimensions include approximately: Top-left horizontal/vertical dimensions: 1.050" Upper-left section: 1.800" Upper-middle section: 1.800" Middle horizontal dimension: 2.100" Left inner rectangle: 3.500" × 2.000" Bottom-left dimensions: 1.850" and 1.200" Bottom-middle dimension: 2.000" Bottom-right dimensions: 1.000" and 1.750" Right-side upper horizontal dimension: 0.500" Right diagonal dimension: 4.500" Lower-right diagonal dimension: 4.000" Include the 135° angle shown in the lower-right section. Draw the object using accurate LINE, POLYLINE, RECTANGLE, OFFSET, TRIM, EXTEND, and DIMENSION commands. Keep all object lines clean and continuous, and place the dimensions outside the object using proper technical drafting standards. The final output should look like a professional 2D CAD plate, matching the reference image in shape, layout, proportions, and measurements. Use a white or light background with black technical lines. Add all dimension lines, extension lines, arrowheads, inch symbols, and the 135° angular dimension exactly as shown.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.