Plates and panels
2-Bolt Exhaust Flange
- Bounding box
- 95.0 × 50.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a symmetrical 2-bolt exhaust flange. The base body is a 10mm thick plate. The overall footprint should be formed by a central cylinder with a 50mm diameter, connected smoothly to two smaller cylinders on either side, each with a 25mm diameter. The centers of the two smaller side cylinders are located 35mm to the left and 35mm to the right of the main central cylinder. Next, cut three through-holes completely through the 10mm thickness: A central exhaust bore with a 35mm diameter in the exact center. A 10mm diameter bolt hole located 35mm to the left of the center. A 10mm diameter bolt hole located 35mm to the right of the center. Add a recessed O-ring groove on the top face of the main central cylinder. The groove must be concentric with the central exhaust bore. It should have an inner diameter of 40mm, an outer diameter of 44mm, and be cut exactly 2mm deep into the top surface.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate thickness | 10 mm | 5 – 20 |
| Central cylinder diameter | 50 mm | 40 – 80 |
| Side cylinder diameter | 25 mm | 10 – 40 |
| Left side cylinder center X | -35 mm | -60 – -20 |
| Right side cylinder center X | 35 mm | 20 – 60 |
| Central exhaust bore diameter | 35 mm | 20 – 45 |
| Bolt hole diameter | 10 mm | 4 – 18 |
| Left bolt hole center X | -35 mm | -60 – -20 |
| Right bolt hole center X | 35 mm | 20 – 60 |
| O-ring groove inner diameter | 40 mm | 36 – 46 |
| O-ring groove outer diameter | 44 mm | 42 – 50 |
| O-ring groove depth | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service