Plates and panels
1:24 Floor Plate with Sprue Frame
- Bounding box
- 190.0 × 87.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
1:24 scale model kit part for FDM 3D printing; units mm; x starts at the front edge, y starts at the bottom edge. Floor plate 176 long x 73 wide x 2 thick; four wheel notches in the long edges, 38 long x 13 deep, centered at x=28 and x=147; tab notches 4.4 long x 1.8 deep: in each long edge at x=4, 60, 88, 116, 172, and in the front and rear edges at 15 left and right of the center line; two axle ribs on the top face at x=28 and x=147, across the width between the wheel notches, each 6 wide x 6 tall x 47 long; 3.6mm through hole along each rib, hole center 2 above the top face. Frame: put the part flat inside a rectangular frame, top face up; frame bars 3 wide x 3 tall; 4mm gap between part and frame; 4 gates join the part to the frame, each 1mm wide, 0.6mm thick, 4mm long, flush with the bottom face of the part, narrowing to 0.5mm wide at the part end. Print rules: part and frame bottoms on one flat plane; raised features on the top face only; no overhangs; no supports; 1.2mm minimum wall; 0.8mm minimum feature.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 176 mm | 50 – 500 |
| Plate Width (Y) | 73 mm | 20 – 300 |
| Plate Thickness | 2 mm | 0.8 – 10 |
| Wheel Notch Length | 38 mm | 5 – 120 |
| Wheel Notch Depth | 13 mm | 1 – 40 |
| Wheel Notch 1 Centre X | 28 mm | 0 – 500 |
| Wheel Notch 2 Centre X | 147 mm | 0 – 500 |
| Tab Notch Length | 4.4 mm | 1 – 20 |
| Tab Notch Depth | 1.8 mm | 0.5 – 10 |
| Axle Rib Width (X) | 6 mm | 1 – 30 |
| Axle Rib Height (Z) | 6 mm | 1 – 40 |
| Axle Rib Length (Y) | 47 mm | 5 – 250 |
| Axle Rib 1 Centre X | 28 mm | 0 – 500 |
| Axle Rib 2 Centre X | 147 mm | 0 – 500 |
| Axle Hole Diameter | 3.6 mm | 0.8 – 20 |
| Axle Hole Centre Above Top Face | 2 mm | 0.5 – 20 |
| Frame Bar Width | 3 mm | 1 – 10 |
| Frame Bar Height | 3 mm | 0.8 – 10 |
| Part-to-Frame Gap | 4 mm | 1 – 20 |
| Gate Width at Frame | 1 mm | 0.3 – 5 |
| Gate Width at Part | 0.5 mm | 0.2 – 3 |
| Gate Length | 4 mm | 1 – 20 |
| Gate Thickness | 0.6 mm | 0.3 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service