Gears and transmission
1:1 Right-Angle Bevel Gearbox – 1in in / 1in out (Briggs 190cc)
- Bounding box
- 297.7 × 271.6 × 115.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
create a gearbox 1" 90degree to 1" output meant for my briggs 190cc with 1" shaft
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 3.5 mm | 2.5 – 5 |
| Teeth per gear (1:1) | 20 | 16 – 30 |
| Face width | 14 mm | 8 – 18 |
| Backlash (per gear) | 0.15 mm | 0 – 0.5 |
| Gear hub length | 10 mm | 5 – 25 |
| Shaft / bore diameter (1in) | 25.4 mm | 19.05 – 25.4 |
| Key width (1/4in) | 6.35 mm | 4.76 – 7.94 |
| Input coupling hub OD | 44 mm | 38 – 60 |
| Coupling bore depth (crank engagement) | 70 mm | 40 – 90 |
| Output shaft stick-out | 80 mm | 40 – 150 |
| Bearing OD (6205-16) | 52 mm | 42 – 62 |
| Bearing width | 15 mm | 10 – 20 |
| Bearing tube length | 75 mm | 50 – 120 |
| Wall thickness | 8 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.