Enclosures and housings
RFQ Cavity with 4 Vanes
- Bounding box
- 340.0 × 340.0 × 5509.7 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
RFQ accelerator cavity, 4-vane structure, total length 5429.66 mm. Rectangular copper housing, outer width 340 mm, outer height 340 mm, wall thickness 20 mm. Four electrodes arranged in a cross pattern inside the cavity: two horizontal vanes and two vertical vanes. Each vane has tip radius 4.21 mm, bevel angles 10 degrees, root corner radius 30 mm. The vane profile varies along the longitudinal direction: at the entrance (z=0) the vane surface distance from the outer wall is 192.9 mm, rising to 204.4 mm at z=2500 mm, then gradually decreasing to 203.9 mm at the exit (z=5429.66 mm). Each vane has an internal cooling channel, diameter 12 mm, running along the full length. End plates on both ends, thickness 40 mm. Beam aperture at the center of both end plates, diameter 20 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing length | 5429.66 mm | 2000 – 10000 |
| Housing outer width | 340 mm | 200 – 600 |
| Housing outer height | 340 mm | 200 – 600 |
| Housing wall thickness | 20 mm | 5 – 50 |
| Vane tip radius | 4.21 mm | 1 – 10 |
| Vane bevel angle | 10 deg | 1 – 45 |
| Root corner radius | 30 mm | 1 – 60 |
| Cooling channel diameter | 12 mm | 4 – 30 |
| Channel offset from inner wall | 30 mm | 10 – 80 |
| Vane surface distance at z=0 | 192.9 mm | 150 – 220 |
| Vane surface distance at mid (z=2500) | 204.4 mm | 180 – 230 |
| Vane surface distance at end (z=length) | 203.9 mm | 180 – 230 |
| Z coordinate of mid distance | 2500 mm | 500 – 5000 |
| End plate thickness | 40 mm | 10 – 80 |
| Beam aperture diameter | 20 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox