Plates and panels
Percutaneous Excluding Ileostomy Kit Assembly
- Bounding box
- 10.0 × 10.0 × 420.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Title: Complete Assembly View – Kit for Percutaneous Excluding IleostomyScale: 1:1 (Recommended)Drawing Specifications:Depict a complete 20Fr silicone catheter tube with an overall length of 40 cm. Illustrate a continuous blue radiopaque stripe running along the entire length of the tube. Draw the distal end featuring a semi-rigid profile with large drainage holes. Overlay the distal drainage holes with a protective silicone "cage" featuring a non-collapsible "hot-air balloon" design and stabilization flanges. Position an inflatable balloon exactly 5 cm from the distal end of the catheter. Depict a movable external retention silicone flange (plate) positioned on the main catheter shaft. Draw a Y-connection at the proximal end. Illustrate the semi-rigid spindle fully inserted into the main catheter lumen.
Parameters
| Name | Value | Range |
|---|---|---|
| Catheter OD | 6.67 mm | 2 – 10 |
| Catheter Length | 400 mm | 200 – 600 |
| Wall Thickness | 1 mm | 0.2 – 3 |
| Stripe Width | 1.5 mm | 0.5 – 3 |
| Stripe Thickness | 0.5 mm | 0.2 – 1 |
| Stripe Angle | 0 deg | 0 – 360 |
| Hole Diameter | 3 mm | 1 – 5 |
| First Hole Offset | 2 mm | 0 – 20 |
| Z Spacing | 5 mm | 1 – 20 |
| Z Levels Count | 2 | 1 – 6 |
| Cage Inner Diameter | 8 mm | 6 – 20 |
| Wire Thickness | 1 mm | 0.5 – 3 |
| Cage Length | 30 mm | 10 – 50 |
| Number of Struts | 4 | 2 – 12 |
| End Ring Thickness | 2 mm | 1 – 5 |
| Balloon OD | 12 mm | 8 – 25 |
| Balloon Length | 15 mm | 5 – 30 |
| Position from Tip | 50 mm | 20 – 100 |
| Flange OD | 50 mm | 20 – 80 |
| Flange Thickness | 3 mm | 1 – 8 |
| Position from Tip | 200 mm | 50 – 350 |
| Hub OD | 12 mm | 6 – 20 |
| Hub Length | 20 mm | 10 – 40 |
| Insertion Depth | 5 mm | 2 – 10 |
| Port OD | 6 mm | 3 – 10 |
| Port ID | 4 mm | 1 – 8 |
| Port Length | 10 mm | 5 – 25 |
| Port Angle | 45 deg | 10 – 80 |
| Spindle Diameter | 4 mm | 2 – 6 |
| Spindle Length | 420 mm | 300 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con