Enclosures and housings
Modular Divider Wall System
- Bounding box
- 82.0 × 96.0 × 41.5 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Refine the existing CAD model only. Do NOT redesign the product or change the overall dimensions. DIVIDER WALL - Add 4 full-height vertical reinforcing ribs to the rear face. - Rib thickness: 1.5–2 mm (50–60% of the 3 mm wall). - Rib depth: 3–4 mm. - Space ribs evenly. - Add 1–2 mm fillets where ribs meet the wall. - Add 2° draft to all ribs. - Keep the front face smooth. - Keep the slide rails unchanged. CONNECTOR Improve the internal engineering without changing the outside size. Add: - Internal guide rails that match the divider wall rails. - Lead-in chamfers at every panel opening. - A reinforced screw boss around the thumb screw hole. - Internal structural ribs connecting the screw boss to the outer walls. - Alignment stops so every divider seats at the same depth. - Anti-rattle features to remove play when assembled. - 2° draft and 1–2 mm fillets on all internal features. The finished model should be optimized for injection molding, stronger, easier to assemble, and maintain the current appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Height | 60 mm | 20 – 200 |
| Wall Width | 50 mm | 20 – 200 |
| Wall Thickness | 3 mm | 2 – 6 |
| Top Corner Fillet | 5 mm | 1 – 10 |
| Rear Rib Count | 4 | 4 – 6 |
| Rib Thickness | 1.5 mm | 1 – 3 |
| Rib Depth | 3 mm | 2 – 6 |
| Rib‑Wall Fillet | 1.5 mm | 0.5 – 2 |
| Rib Width | 2 mm | 1 – 4 |
| Rail Width | 6 mm | 4 – 12 |
| Rail Depth | 4 mm | 2 – 8 |
| Groove Width | 5 mm | 3 – 10 |
| Groove Depth | 1.5 mm | 1 – 3 |
| Groove Height | 25 mm | 5 – 100 |
| Positive Stop Height | 6 mm | 3 – 15 |
| Connector Length | 40 mm | 20 – 100 |
| Connector Width | 30 mm | 20 – 80 |
| Connector Height | 40 mm | 20 – 100 |
| Clamp Thickness | 3 mm | 2 – 6 |
| Guide Rail Clearance | 0.2 mm | 0.1 – 0.5 |
| Lead‑In Chamfer Size | 1 mm | 0.5 – 2 |
| Screw Boss Outer Dia | 12 mm | 8 – 20 |
| Connector Rib Thickness | 1.5 mm | 1 – 3 |
| Screw Dia | 6 mm | 3 – 10 |
| Screw Length | 20 mm | 10 – 40 |
| Head Dia | 16 mm | 10 – 25 |
| Head Height | 8 mm | 4 – 15 |
| Shoulder Dia | 10 mm | 6 – 18 |
| Shoulder Height | 3 mm | 1 – 6 |
| Exploded Gap | 10 mm | 0 – 50 |
| Draft Angle (deg) | 2 deg | 0 – 5 |
| Internal Fillet Radius | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox