Enclosures and housings
Cylindrical Jet Pump Stator Housing
- Bounding box
- 210.1 × 210.0 × 200.1 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
A cylindrical jet pump stator housing. Body: a hollow cylinder, inner bore 155.5 mm, wall thickness 8 mm, overall length 150 mm, axis horizontal. Front flange: at the inlet end, a flange 210 mm outer diameter, 10 mm thick, with six 9 mm diameter through holes evenly spaced on a 190 mm bolt circle. Rear flange: at the outlet end, a flange 190 mm outer diameter, 8 mm thick, with four 9 mm diameter through holes evenly spaced on a 170 mm bolt circle. Center hub: a coaxial cylinder 60 mm outer diameter, 90 mm long, starting 30 mm from the inlet end, with a 40 mm diameter bore through its full length. Vanes: eight identical straightening vanes connecting the hub outer surface to the housing inner bore. Each vane is 5 mm thick, spans the full 90 mm hub length, and twists 25 degrees about the housing axis from its leading edge to its trailing edge, all in the same rotational direction. Tail cone: a cone on the rear face of the hub, tapering from 60 mm diameter to 20 mm diameter over a length of 70 mm. Finish: fillet all vane-to-hub and vane-to-bore junctions with a 4 mm radius. Chamfer both flange outer edges 1.5 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Inner Diameter | 155.5 mm | 50 – 300 |
| Body Wall Thickness | 8 mm | 2 – 50 |
| Body Length | 150 mm | 50 – 500 |
| Front Flange Outer Diameter | 210 mm | 100 – 400 |
| Front Flange Thickness | 10 mm | 3 – 30 |
| Front Flange Hole Diameter | 9 mm | 3 – 25 |
| Front Flange Bolt Circle Dia | 190 mm | 100 – 380 |
| Front Flange Hole Count | 6 | 2 – 12 |
| Rear Flange Outer Diameter | 190 mm | 100 – 400 |
| Rear Flange Thickness | 8 mm | 3 – 30 |
| Rear Flange Hole Diameter | 9 mm | 3 – 25 |
| Rear Flange Bolt Circle Dia | 170 mm | 100 – 350 |
| Rear Flange Hole Count | 4 | 2 – 12 |
| Hub Outer Diameter | 60 mm | 20 – 150 |
| Hub Length | 90 mm | 20 – 300 |
| Hub Start from Inlet | 30 mm | 0 – 100 |
| Hub Bore Diameter | 40 mm | 10 – 100 |
| Vane Count | 8 | 2 – 16 |
| Vane Thickness | 5 mm | 2 – 20 |
| Vane Twist Angle | 25 deg | 0 – 90 |
| Tail Cone Base Diameter | 60 mm | 20 – 150 |
| Tail Cone Tip Diameter | 20 mm | 5 – 100 |
| Tail Cone Length | 70 mm | 10 – 200 |
| Fillet Radius (vane junctions) | 4 mm | 1 – 10 |
| Flange Outer Edge Chamfer | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox