Apple Watch Desk Stand

3D printable mechanical CAD model of a smartwatch desk stand, engineered for the Apple Watch Series 9 USB-C fast charging puck. The design utilizes precise hard-surface geometries, sharp feature lines, and technical chamfers/fillets rather than organic sculpting, optimized for STEP/IGES file translation. 1. BASE PLATE GEOMETRY: - Cylinder primitive base: 80mm diameter, 6mm vertical thickness. - Bottom face features a flat, high-stability reference plane. - Underside extrusion: A recessed rectangular cable-routing channel, 4.2mm wide and 4.2mm deep, originating from the center axis and exiting straight out the rear edge. 2. CENTRAL CHARGING DOCK: - Main receiver pocket located at the geometric center of the upper sub-assembly. - Blind circular bore: Exactly 27.8mm diameter (providing a 0.2mm tolerance fit for the Series 9 puck) and 6.0mm depth. - Pass-through wire hole: A 7mm circular hole extruded completely through the bottom of the bore to feed the USB-C connector through. 3. UPRISE SUPPORT STRUCTURE (RIMURU DESCRIPTION BY GEOMETRY): - Vertical torso block rising from the rear quadrant of the base plate, total height 75mm. - The main body forms the sleek silhouette of an anime long coat/tunic. The lower 20mm flares outward slightly using a loft with a 3-degree draft angle to mimic a coat hem. - Around the neck area, a stylized scarf structure is formed by two concentric, stepped rectangular sweeps wrapping around the torso axis, featuring 1mm sharp step-downs to create depth layers. - Long straight hair is represented by a series of parallel, vertical prismatic extrusions down the back and sides of the upper block, each strand terminated with a 45-degree angled chamfer cut to form clean, sharp geometric points. 4. DOCK INTEGRATION & CARING ARMS: - Two mechanical arms extend symmetrically forward from the upper torso block. - The arms curve around the sides of the central 27.8mm circular charging pocket. - The hands terminate as simplified, low-poly 3D geometric cuffs that flank the left and right sides of the watch face, structurally cradling the outer rim of the watch housing without blocking the screen or band paths. - Clearance zones: A 12mm wide unobstructed vertical relief channel is cut completely through both sides of the dock assembly to accommodate thick open or closed-loop watch straps hanging downward. 5. SURFACE FINISH & FILLETS: - All external structural edges feature a uniform 1.0mm fillet radius for stress relief and clean 3D printing. - No loose, organic, or non-manifold mesh sculpting surfaces; all features must be defined by intersecting booleans, extrusions, and lofts.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.