Everything else
MRL Elite Vault Bottom Half with TPU Insert Pocket
- Bounding box
- 120.0 × 90.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing MRL Elite Vault bottom half. Do not change the outside dimensions. Keep the existing wall thickness and M3 corner bosses. Add a removable rectangular insert pocket for a TPU insert. The insert will hold four upright 3 mL laboratory vials arranged in a 2 × 2 pattern. Leave a 0.3 mm clearance around the insert for a snug press fit. Do not create the insert yet. Keep all geometry printable in PETG without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Case Length | 120 mm | 60 – 300 |
| Case Width | 80 mm | 40 – 200 |
| Case Height | 30 mm | 10 – 80 |
| Wall Thickness | 3 mm | 1.2 – 10 |
| Outer Fillet Radius | 4 mm | 0.5 – 10 |
| Chamfer Size | 1 mm | 0.2 – 3 |
| Boss Outer Diameter | 8 mm | 4 – 20 |
| Boss Inner Diameter (hole) | 5.2 mm | 3 – 16 |
| Boss Hole Depth | 8 mm | 2 – 30 |
| Boss X Offset | 6 mm | 2 – 30 |
| Boss Y Offset | 6 mm | 2 – 30 |
| Latch Mount Width | 16 mm | 6 – 50 |
| Latch Mount Height | 10 mm | 4 – 30 |
| Latch Mount Depth | 3 mm | 1 – 10 |
| Logo Width | 30 mm | 10 – 80 |
| Logo Height | 10 mm | 5 – 40 |
| Logo Depth | 0.5 mm | 0.2 – 2 |
| Logo Bottom Z (from floor) | 5 mm | 0 – 30 |
| Hinge Barrel Width | 12 mm | 5 – 30 |
| Hinge Barrel Diameter | 10 mm | 4 – 20 |
| Hinge Barrel Hole Diameter | 4 mm | 2 – 12 |
| Hinge Barrel Offset from Side | 10 mm | 3 – 30 |
| Magnet Pocket Diameter | 8 mm | 4 – 16 |
| Magnet Pocket Depth | 3 mm | 1.5 – 8 |
| Magnet Pocket Offset from Side | 15 mm | 5 – 40 |
| Magnet Pocket Spacing from Bottom | 8 mm | 2 – 20 |
| Pocket Length (X) | 40 mm | 10 – 200 |
| Pocket Width (Y) | 40 mm | 10 – 200 |
| Pocket Depth (Z) | 20 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like