Text to CAD for 3D printing

3D printing normally starts with finding or modeling an STL file. Text to CAD lets you create a custom part directly from a description, then export it as a printable STL. This is the fastest path from idea to printed object when you cannot find an existing model that fits.

The workflow

Describe the part in plain English, including the overall size, wall thickness, and any holes. Generate the model, then use the dimension sliders to dial in exact values. When the part looks right, export an STL and open it in your slicer.

Getting accurate prints

Printers are not perfectly precise, so design with tolerance in mind. For holes and slots that need to fit a fastener or another part, add a small clearance. Verify wall thickness is above your printer minimum, usually around 0.8 mm for FDM. Confirm every critical dimension on the sliders before you export.

Frequently asked questions

Can I 3D print a model generated from text?

Yes. Generate the model from your prompt, set the dimensions with sliders, and export an STL. Load that STL into any slicer such as Cura, PrusaSlicer, or Bambu Studio.

How do I make sure the print fits?

State critical dimensions in the prompt and confirm them on the sliders before exporting. For parts that mate with others, add clearance for your printer tolerance, usually a few tenths of a millimeter.

STL or STEP for 3D printing?

Use STL for 3D printing because slicers expect a mesh. Keep STEP if you also want to edit the part later in CAD software or send it for manufacturing.

Generate a printable model from text

Describe the part, set the dimensions, and export an STL for your 3D printer.

Launch Editor View Pricing